USB3.0 / USB3.1 Gen1 Device Controller 您所在的位置:网站首页 fpga usb3 USB3.0 / USB3.1 Gen1 Device Controller

USB3.0 / USB3.1 Gen1 Device Controller

#USB3.0 / USB3.1 Gen1 Device Controller| 来源: 网络整理| 查看: 265

Product Description

Corigine provides USB 3.0 / USB3.1 Gen 1 controllers that are USB-IF certified. Corigine's USB IP is based on the USB 3.0 specification from the USB Implementers Forum (USB-IF). USB-IF certification reduces the risk of IP design errors due to specification interpretations. Corigine USB controllers are based on a next generation architecture which can fully take advantage of the latest USB features, while maintaining the smallest size, lowest power, and maximum configurability.

Key Features and Benefits Highly configurable architecture to achieve the most optimized size and power for target applications Support 16/32/64-bit PIPE Interface, 8/16-bit UTMI+ Interface and 8-bit ULPI Interface, to guarantee compatibility with all USB 2.0 & USB 3.0 PHYs Compatible with AMD GTX, GTY, GTH serdes. No need for an external PHY chip Industry standard AMBA interfaces, can be easily integrated into SoC Supports SuperSpeed USB 3.0 at 5 Gbps , High-Speed and Full-Speed USB (USB 2.0) Compliant with xHCI specification revision 1.1 Next generation USB controller architecture producing the smallest size, lowest power, and maximum configurability USB-IF Certified full-feature USB device solution


【本文地址】

公司简介

联系我们

今日新闻

    推荐新闻

    专题文章
      CopyRight 2018-2019 实验室设备网 版权所有